Nikon UT-1 Uživatelský manuál

Communication UnitUser’s ManualEnRefer to the manual for use with your camera.D4-Series, D7000Communication Unit UT-1 User's Manual (supplied wit

ixNoticesNotices for Customers in CanadaCAUTION : This class B digital apparatus complies with Canadian ICES-003.ATTENTION : Cet appareil numerique de

91Creating an FTP ServerAppendices11Choose a home directory.Open the Home Directory tab and select A directory located on this computer. The root dire

92Creating an FTP ServerAppendicesWindows XP1 Display network connections.Click Start > Control Panel > Network and Internet Settings > Netwo

93Creating an FTP ServerAppendices4 Enter an IP address and subnet mask.Enter an IP address and subnet mask for the ftp server and click OK.5 Open Int

94Creating an FTP ServerAppendices6 Display ftp site properties.Right-click Default FTP Site and select Properties.7 Select the address and port numbe

95Creating an FTP ServerAppendices8 Choose a home directory.Open the Home Directory tab and select a directory located on this computer. The root dire

96Creating an FTP ServerAppendicesMac OS X 10.61 Display network settings.Open System Preferences and click Network.2 Adjust network settings.Click th

97Creating an FTP ServerAppendices4 Display file sharing options.Select File Sharing and click Options.5 Turn ftp file sharing on.Select Share files a

98Creating ftp Profiles Using Camera MenusAppendicesCreating ftp Profiles Using Camera MenusIn FTP upload mode, the camera menus can be used in place

99Creating ftp Profiles Using Camera MenusAppendices2 Turn the camera on.3 Press the power switch for about a second to turn the UT-1 on.4 Select the

100Creating ftp Profiles Using Camera MenusAppendices6 Adjust settings.Adjust settings as described in “Editing ftp Server Profiles” (069).

101TroubleshootingAppendicesTroubleshootingProblem Solution Page“POWER” LED does not light.• Turn the UT-1 on.• Confirm that the battery is inserted a

102SpecificationsAppendicesSpecifications❚❚ Communication Unit UT-1EthernetStandards IEEE 802.3u (100 base-TX)/IEEE 802.3 (10 base-T)Data rates 10/100

103SpecificationsAppendices* With large antenna at wireless LAN access point. Range may vary with signal strength and presence or absence of obstacles

104SpecificationsAppendicesA Battery LifeThe length of time batteries can be used and the number of shots that can be uploaded before recharging varie

105IndexAppendicesIndexSymbolsa: “Send” ...36, 63b: “Sending”...36, 63

106IndexAppendicesWireless LAN ... 71Wireless Transmitter Utility ... 12, 18, 46

Communication UnitManual for Usersof D800/D800E Digital CamerasEn

iiWhat the UT-1 Can Do for YouWhat the UT-1 Can Do for YouThis manual describes how to connect to a network and upload pictures to a computer or ftp s

iiiWhat the UT-1 Can Do for YouOnce a network connection has been established, you can:Upload existing photos and moviesTake or browse photos remotely

ivWhat the UT-1 Can Do for YouTrademark InformationMac OS is a trademark of Apple Computer, Inc. Microsoft, Windows, and Windows Vista are registered

xiMenu Guide... 67Choose Hardware...

vFor Your SafetyFor Your SafetyTo prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in th

viFor Your SafetyAvoid extended contactDo not remain in contact with the camera, communication unit, battery, or charger for extended periods while th

viiNoticesNotices• No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or tra

viiiNoticesNotice for Customers in the U.S.A.❏ U.S.A. Federal Communications Commission (FCC) Declaration of ConformityFCC Radio Frequency Interferen

ixNoticesNotices for Customers in CanadaCAUTION : This class B digital apparatus complies with Canadian ICES-003.ATTENTION : Cet appareil numerique de

xTable of ContentsWhat the UT-1 Can Do for You ... iiFor Your Safety ...

xiFTP ... 57Ethernet Connections...

xiiAppendices ... 91Copying Profiles...

xiiiA Background KnowledgeThis manual assumes basic knowledge of ftp servers and local area networks (LANs). For more information on installing, conf

xiv

xiiA Background KnowledgeThis manual assumes basic knowledge of ftp servers and local area networks (LANs). For more information on installing, confi

Introduction 1IntroductionThank you for your purchase of a UT-1 communication unit for compatible Nikon digital cameras. This manual is intended for u

2Parts of the UT-1IntroductionParts of the UT-1A The POWER LEDWhen the UT-1 is on, the POWER LED glows green to indicate that the battery is fully cha

3Parts of the UT-1IntroductionA Supplied AccessoriesThe following accessories are supplied with the UT-1 (batteries such as the EN-EL15 and the batter

4Attaching the UT-1IntroductionAttaching the UT-1Connect the UT-1 to the camera using the B USB cable supplied with the UT-1.A USB Cable Gaskets and C

5Attaching the UT-1IntroductionUT-1When connecting the USB cable to the UT-1, attach the supplied UF3-RU14 cable gasket as shown.A Attaching the UT-1T

6Attaching the UT-1IntroductionConnecting the WT-5The UT-1 can be used in combination with the optional WT-5 wireless transmitter to connect to wirele

7Supported Network FunctionsIntroductionSupported Network FunctionsThe UT-1 connects the camera to Ethernet and, with the addition of an optional WT-5

8Supported Network FunctionsIntroductionA FTP ServersServers can be configured using standard ftp services available with supported operating systems,

9WorkflowIntroductionWorkflowPreparing the UT-1❏ Inserting the BatteryTo prevent loss of power during setup or upload, use a fully-charged battery or

10WorkflowIntroductionA Removing the BatteryBeing careful not to drop the battery, open the battery-chamber cover and remove the battery as shown at r

5Attaching the UT-1IntroductionA Attaching the UT-1The UT-1 can be mounted on a tripod or the camera accessory shoe. To mount the UT-1 on the camera w

11WorkflowIntroductionInstalling the Wireless Transmitter UtilityThis section describes how to install the Wireless Transmitter Utility. The Wireless

12WorkflowIntroduction1. Be sure to update to the latest versions of the UT-1 firmware and supplied software. Users of the D800 or D800E will need to

13WorkflowIntroduction❏ Installing SoftwareBefore connecting to a network, install the Wireless Transmitter Utility. The Wireless Transmitter Utility

14WorkflowIntroduction3 Start the installer.Click Next (Windows) or Continue (Mac OS) and follow the on-screen instructions.4 Exit the installer.Click

Transfer, Control, and HTTP 15Transfer, Control, and HTTPEthernet ConnectionsFollow the steps below to connect via an Ethernet network. For informatio

Ethernet ConnectionsTransfer, Control, and HTTP16Step 1: Connecting the EquipmentBefore proceeding with the following steps, start the computer and lo

Ethernet ConnectionsTransfer, Control, and HTTP 174 Turn the camera on.Rotate the power switch to turn the camera on.5 Press the power switch for abou

Ethernet ConnectionsTransfer, Control, and HTTP18Step 2: Configuring the Hardware for Ethernet ConnectionsConfigure the UT-1 for use with Ethernet net

Ethernet ConnectionsTransfer, Control, and HTTP 193 Start the connection wizard.Highlight Connection wizard and press 2 to start the connection wizard

Ethernet ConnectionsTransfer, Control, and HTTP206 Obtain or select an IP address.Highlight one of the following options and press 2.• Obtain automati

Attaching the UT-1 / Connecting the WT-5Introduction6Connecting the WT-5The UT-1 can be used in combination with the optional WT-5 wireless transmitte

Ethernet ConnectionsTransfer, Control, and HTTP 218 Exit the wizard.Highlight one of the following options and press J.• Connect and exit wizard: Save

Ethernet ConnectionsTransfer, Control, and HTTP222 Start the Wireless Transmitter Utility.When prompted, start the copy of the Wireless Transmitter Ut

Wireless ConnectionsTransfer, Control, and HTTP 23Wireless ConnectionsFollow the steps below to connect to a wireless network.Image transfer Camera co

Wireless ConnectionsTransfer, Control, and HTTP24A Infrastructure and Ad Hoc ModesWireless networks may be either infrastructure or ad hoc.Infrastruct

Wireless ConnectionsTransfer, Control, and HTTP 25Step 1: Readying the EquipmentAfter starting the computer and logging in, ready the camera and WT-5

Wireless ConnectionsTransfer, Control, and HTTP26Step 2: Enabling a Wireless ConnectionConfigure the UT-1 for use with wireless networks.1 Display the

Wireless ConnectionsTransfer, Control, and HTTP 273 Start the connection wizard.Highlight Connection wizard and press 2 to start the connection wizard

Wireless ConnectionsTransfer, Control, and HTTP28❚❚ Search for Wireless NetworkSelect Search for wireless network in Step 6 on page 27 to choose from

29Wireless ConnectionsTransfer, Control, and HTTP3 Choose your next step.The message at right is displayed when a connection is established. Proceed t

30Wireless ConnectionsTransfer, Control, and HTTP❚❚ PIN-Entry WPSChoose PIN-entry WPS in Step 6 on page 27 if the wireless LAN access point uses PIN-e

7Supported ModesIntroductionSupported ModesThe UT-1 connects the camera to Ethernet and, with the addition of an optional WT-5 wireless transmitter, w

31Wireless ConnectionsTransfer, Control, and HTTP❚❚ Direct Connection (Ad Hoc)To connect directly to an ftp server or computer in ad hoc mode, select

32Wireless ConnectionsTransfer, Control, and HTTPStep 4: Network SettingsChoose an IP address.1 Choose whether to copy the profile to the computer.Hig

33Wireless ConnectionsTransfer, Control, and HTTP2 Obtain or select an IP address.Highlight one of the following options and press 2.• Obtain automati

34Wireless ConnectionsTransfer, Control, and HTTP5 Start the Wireless Transmitter Utility.When prompted, start the copy of the Wireless Transmitter Ut

65Wireless ConnectionsFTPStep 1: Connecting the EquipmentAfter starting the computer and logging in, ready the camera and WT-5 as described below.1 In

66Wireless ConnectionsFTPStep 2: Enabling a Wireless ConnectionConfigure the UT-1 for use with wireless networks.1 Display the hardware list.In the se

67Wireless ConnectionsFTP3 Start the connection wizard.Highlight Connection wizard and press 2 to start the connection wizard.4 Choose FTP upload (07)

68Wireless ConnectionsFTP❚❚ Search for Wireless NetworkSelect Search for wireless network in Step 6 on page 67 to choose from a list of the networks

69Wireless ConnectionsFTP3 Choose your next step.The message at right is displayed when a connection is established. Proceed to page 72.❚❚ Push-Button

70Wireless ConnectionsFTP❚❚ PIN-Entry WPSChoose PIN-entry WPS in Step 6 on page 67 if the wireless LAN access point uses PIN-entry WPS.1 Enter the PIN

8Supported ModesIntroductionA FTP ServersServers can be configured using standard ftp services available with supported operating systems, such as IIS

71Wireless ConnectionsFTP❚❚ Direct Connection (Ad Hoc)To connect directly to an ftp server or computer in ad hoc mode, select Direct connection (ad ho

72Wireless ConnectionsFTPStep 4: Network SettingsFollow the steps below to connect to the ftp server.1 Obtain or select an IP address.Highlight one of

73Wireless ConnectionsFTP4 Log in.Highlight one of the following options and press J.• Anonymous login: Select this option if the server does not requ

74Wireless ConnectionsFTP5 Choose a destination folder.Highlight one of the following options and press J.• Home folder: Select this option to upload

75FTP UploadFTPFTP UploadPhotos and movies can be uploaded from camera memory cards to an ftp server as described below, or photos can be uploaded as

76FTP UploadFTP3 Upload pictures.Press J. A white transfer icon will appear on the picture and upload will begin immediately. The transfer icon turns

77FTP UploadFTPUploading New Photographs as They Are TakenTo upload new photographs as they are taken, select On for Network (UT-1) > Options >

78FTP UploadFTPTransfer StatusDuring playback, the status of images selected for upload is shown as follows:a: “Send”Images that have been selected fo

79FTP UploadFTPThe Status DisplayNetwork status can also be viewed in the top level of the network menu.Signal strength: Wireless signal strength. Eth

80FTP UploadFTP

9WorkflowIntroductionWorkflowWhen using the UT-1 for the first time, follow the steps below to set up the UT-1, install the required software and uplo

Menu Guide 81Menu GuideThis section describes the settings available for the Network (UT-1) option in the camera setup menu when the UT-1 is connected

82Network SettingsMenu GuideNetwork SettingsHighlight Network settings and press 2 to display the network profiles list, where you can create new prof

83Network SettingsMenu GuideCopy to/from CardThis option is available only with ftp and http server connections. Select Copy profile from card to copy

84Network SettingsMenu GuideEditing Network ProfilesTo edit network profiles, highlight the profile in the profile list, press W, and choose from the

85Network SettingsMenu Guide❏ WirelessEdit the following wireless settings:• SSID (required): Enter the name (SSID) of the network on which the host c

86Network SettingsMenu Guide❏ TCP/IPIf the network is configured to supply IP addresses automatically, select Enable for Obtain automatically. Otherwi

87OptionsMenu GuideOptionsEdit the following settings.Auto SendIf On is selected for image transfer or ftp server connections, photos will automatical

88OptionsMenu GuideOverwrite If Same NameChoose Ye s to overwrite files with duplicate names during upload to an ftp server, No to add numbers to the

89OptionsMenu GuideHTTP User SettingsEnter a user name and password for connection to an http server (http server connections only).Battery InfoDispla

90OptionsMenu GuideFirmware VersionView the current UT-1 firmware version.

10WorkflowIntroductionPreparing the UT-1❏ Inserting the BatteryTo prevent loss of power during setup or upload, use a fully-charged battery or an opti

Appendices 91AppendicesCopying ProfilesCamera network profiles can be copied to a computer, which will then automatically be configured for wireless c

92Copying ProfilesAppendices4 Choose an adapter.Choose an adapter from the pull-down menu and click Next. If Image transfer or Camera control is selec

93Creating Profiles on a ComputerAppendicesCreating Profiles on a ComputerThe Wireless Transmitter Utility (011) can be used to create network profile

94Creating an FTP ServerAppendicesCreating an FTP ServerImages can be uploaded to ftp servers created using the standard ftp services included with Wi

95Creating an FTP ServerAppendicesWindows 8.1/Windows 71 Go to Network and Sharing Center.Click Control Panel > Network and Internet > Network a

96Creating an FTP ServerAppendices4 Display TCP/IP settings.Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

97Creating an FTP ServerAppendices5 Enter an IP address and subnet mask.Enter an IP address and subnet mask for the ftp server and click OK.

98Creating an FTP ServerAppendices6 Close the network properties dialog.Click Close.7 Open Administrative Tools.Click Control Panel > System and Se

99Creating an FTP ServerAppendices8 Open the IIS manager.Double-click Internet Information Services (IIS) Manager.9 Select Add FTP Site…Right-click th

100Creating an FTP ServerAppendices10Enter site information.Name the site and choose the path to the folder that will be used for ftp upload. Click Ne

Communication UnitManual for Usersof D7100 Digital CamerasEn

11WorkflowIntroductionA Removing the BatteryBeing careful not to drop the battery, open the battery-chamber cover and remove the battery as shown at r

101Creating an FTP ServerAppendices11Choose binding and SSL options.Select the IP address entered in Step 5, note the port number, select Start FTP si

102Creating an FTP ServerAppendices12Choose authentication options.Adjust settings as described below and click Finish.• Authentication: Basic• Allow

103Creating an FTP ServerAppendicesWindows Vista1 Display network connections.Click Start > Control Panel > Network and Internet Settings > N

104Creating an FTP ServerAppendices4 Display TCP/IP settings.Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

105Creating an FTP ServerAppendices5 Enter an IP address and subnet mask.Enter an IP address and subnet mask for the ftp server and click OK.6 Open Ad

106Creating an FTP ServerAppendices7 Open the IIS manager.Double-click Internet Information Services (IIS) 6.0 Manager.8 Click Allow.A “User Account C

107Creating an FTP ServerAppendices9 Display ftp site properties.Right-click Default FTP Site and select Properties.

108Creating an FTP ServerAppendices10Select the address and port number.Select the IP address entered in Step 5 and enter a TCP port number.

109Creating an FTP ServerAppendices11Choose a home directory.Open the Home Directory tab and select A directory located on this computer. The root dir

110Creating an FTP ServerAppendicesWindows XP1 Display network connections.Click Start > Control Panel > Network and Internet Settings > Netw

12WorkflowIntroductionInstalling the Wireless Transmitter UtilityThis section describes how to install the Wireless Transmitter Utility. The Wireless

111Creating an FTP ServerAppendices4 Enter an IP address and subnet mask.Enter an IP address and subnet mask for the ftp server and click OK.5 Open In

112Creating an FTP ServerAppendices6 Display ftp site properties.Right-click Default FTP Site and select Properties.7 Select the address and port numb

113Creating an FTP ServerAppendices8 Choose a home directory.Open the Home Directory tab and select a directory located on this computer. The root dir

114Manual Profile CreationAppendicesManual Profile CreationFollow the steps below to manually configure the camera for connection to ftp and http serv

115Manual Profile CreationAppendices4 Select a connection type.Highlight FTP upload or HTTP server and press 2.5 Adjust settings.Adjust settings as de

116TroubleshootingAppendicesTroubleshootingProblem Solution Page“POWER” LED does not light.• Turn the UT-1 on.• Confirm that the battery is inserted a

117SpecificationsAppendicesSpecifications❚❚ Communication Unit UT-1EthernetStandards IEEE 802.3u (100BASE-TX)/IEEE 802.3 (10BASE-T)Data rates*10/100 M

118SpecificationsAppendices* Maximum logical data rates according to IEEE standard. Actual rates may differ.† With large antenna at wireless LAN acce

119SpecificationsAppendicesA Battery LifeThe length of time batteries can be used and the number of shots that can be uploaded before recharging varie

120SpecificationsAppendices

13WorkflowIntroduction1. Be sure to update to the latest versions of the UT-1 firmware and supplied software. Users of the D7100 will need to update t

121IndexAppendicesIndexSymbolsa: “Send” ...38, 78b: “Sending”...38, 78

122IndexAppendicesSSearch for wireless network .. 27, 28, 67, 68Send file as... 87Send folder ...

Communication UnitUser’s Manual Version 2En

iiWhat the UT-1 Can Do for YouWhat the UT-1 Can Do for YouThis manual describes how to connect to a network and upload pictures to a computer or ftp s

iiiWhat the UT-1 Can Do for YouOnce a network connection has been established, you can:Upload existing photos and moviesTake or browse photos remotely

ivWhat the UT-1 Can Do for YouTrademark InformationMac, OS X, and iPhone are registered trademarks of Apple Inc. in the United States and/or other cou

vFor Your SafetyFor Your SafetyTo prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in th

viFor Your SafetyAvoid extended contactDo not remain in contact with the camera, communication unit, battery, or charger for extended periods while th

viiNoticesNotices• No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or tra

viiiNoticesNotice for Customers in the U.S.A.❏ U.S.A. Federal Communications Commission (FCC) Declaration of ConformityFCC Radio Frequency Interferen

14WorkflowIntroduction❏ Installing SoftwareBefore connecting to a network, install the Wireless Transmitter Utility. The Wireless Transmitter Utility

ixNoticesNotices for Customers in CanadaCAUTION : This class B digital apparatus complies with Canadian ICES-003.ATTENTION : Cet appareil numerique de

xTable of ContentsWhat the UT-1 Can Do for You ... iiFor Your Safety ...

xiFTP ... 57Ethernet Connections...

xiiAppendices ... 91Copying Profiles...

xiiiA Background KnowledgeThis manual assumes basic knowledge of ftp servers and local area networks (LANs). For more information on installing, conf

xiv

Introduction 1IntroductionThank you for your purchase of a UT-1 communication unit for compatible Nikon digital cameras. Please read this manual thoro

2Parts of the UT-1IntroductionParts of the UT-1A The POWER LEDWhen the UT-1 is on, the POWER LED glows green to indicate that the battery is fully cha

3Parts of the UT-1IntroductionA Supplied AccessoriesThe following accessories are supplied with the UT-1 (batteries such as the EN-EL15 are not suppli

4Attaching the UT-1IntroductionAttaching the UT-1Connect the UT-1 to the camera using the USB cable designated in the camera manual.

15WorkflowIntroduction3 Start the installer.Click Next (Windows) or Continue (Mac OS) and follow the on-screen instructions.4 Exit the installer.Click

5Attaching the UT-1IntroductionA Attaching the UT-1The UT-1 can be mounted on a tripod or the camera accessory shoe. To mount the UT-1 on the camera w

6Attaching the UT-1IntroductionConnecting the WT-5The UT-1 can be used in combination with the optional WT-5 wireless transmitter to connect to wirele

7Supported Network FunctionsIntroductionSupported Network FunctionsThe UT-1 connects the camera to Ethernet and, with the addition of an optional WT-5

8Supported Network FunctionsIntroductionA FTP ServersServers can be configured using standard ftp services available with supported operating systems,

9WorkflowIntroductionWorkflowPreparing the UT-1❏ Inserting the BatteryTo prevent loss of power during setup or upload, use a fully-charged battery or

10WorkflowIntroductionA Removing the BatteryBeing careful not to drop the battery, open the battery-chamber cover and remove the battery as shown at r

11WorkflowIntroductionInstalling the Wireless Transmitter UtilityThis section describes how to install the Wireless Transmitter Utility. The Wireless

12WorkflowIntroduction* Connect the camera directly to the computer. The camera may not function as expected when connected via a hub, extension cabl

13WorkflowIntroduction❏ Installing SoftwareBefore connecting to a network, install the Wireless Transmitter Utility as described below. Before proceed

14WorkflowIntroduction3 Start the installer.Click Next (Windows) or Continue (OS X) and follow the on-screen instructions.4 Exit the installer.Click O

16WorkflowIntroduction

Transfer, Control, and HTTP 15Transfer, Control, and HTTPEthernet ConnectionsFollow the steps below to connect via an Ethernet network. For informatio

Ethernet ConnectionsTransfer, Control, and HTTP16Step 1: Connecting the EquipmentBefore proceeding with the following steps, start the computer and lo

Ethernet ConnectionsTransfer, Control, and HTTP 174 Turn the camera on.Rotate the power switch to turn the camera on.5 Press the power switch for abou

Ethernet ConnectionsTransfer, Control, and HTTP18Step 2: Configuring the Hardware for Ethernet ConnectionsConfigure the UT-1 for use with Ethernet net

Ethernet ConnectionsTransfer, Control, and HTTP 193 Start the connection wizard.Highlight Connection wizard and press 2 to start the connection wizard

Ethernet ConnectionsTransfer, Control, and HTTP206 Obtain or select an IP address.Highlight one of the following options and press 2.• Obtain automati

Ethernet ConnectionsTransfer, Control, and HTTP 218 Exit the wizard.Highlight one of the following options and press J.• Connect and exit wizard: Save

Ethernet ConnectionsTransfer, Control, and HTTP222 Start the Wireless Transmitter Utility.When prompted, start the copy of the Wireless Transmitter Ut

Wireless ConnectionsTransfer, Control, and HTTP 23Wireless ConnectionsFollow the steps below to connect to a wireless network.Image transfer Camera co

Wireless ConnectionsTransfer, Control, and HTTP24A Infrastructure and Ad Hoc ModesWireless networks may be either infrastructure or ad hoc.Infrastruct

Using the UT-1 with a Computer 17Using the UT-1 with a ComputerThe UT-1 can be used in the following modes:• Image transfer: Upload images to a compu

Wireless ConnectionsTransfer, Control, and HTTP 25Step 1: Readying the EquipmentAfter starting the computer and logging in, ready the camera and WT-5

Wireless ConnectionsTransfer, Control, and HTTP26Step 2: Enabling a Wireless ConnectionConfigure the UT-1 for use with wireless networks.1 Display the

Wireless ConnectionsTransfer, Control, and HTTP 273 Start the connection wizard.Highlight Connection wizard and press 2 to start the connection wizard

Wireless ConnectionsTransfer, Control, and HTTP28❚❚ Search for Wireless NetworkSelect Search for wireless network in Step 6 on page 27 to choose from

29Wireless ConnectionsTransfer, Control, and HTTP3 Choose your next step.The message at right is displayed when a connection is established. Proceed t

30Wireless ConnectionsTransfer, Control, and HTTP❚❚ PIN-Entry WPSChoose PIN-entry WPS in Step 6 on page 27 if the wireless LAN access point uses PIN-e

31Wireless ConnectionsTransfer, Control, and HTTP❚❚ Direct Connection (Ad Hoc)To connect directly to an ftp server or computer in ad hoc mode, select

32Wireless ConnectionsTransfer, Control, and HTTPStep 4: Network SettingsChoose an IP address.1 Choose whether to copy the profile to the computer.Hig

33Wireless ConnectionsTransfer, Control, and HTTP2 Obtain or select an IP address.Highlight one of the following options and press 2.• Obtain automati

34Wireless ConnectionsTransfer, Control, and HTTP5 Start the Wireless Transmitter Utility.When prompted, start the copy of the Wireless Transmitter Ut

Copying Network Profiles to the CameraUsing the UT-1 with a Computer18Copying Network Profiles to the CameraBefore copying network profiles, confirm t

35Image TransferTransfer, Control, and HTTPImage TransferImage transfer is used to upload photographs and movies to the computer from a camera memory

36Image TransferTransfer, Control, and HTTP3 Upload pictures.Press J. A white transfer icon will appear on the picture and upload will begin immediate

37Image TransferTransfer, Control, and HTTPInterrupting Transmission/Removing Transfer MarkingTo cancel transmission of images marked with white or gr

38Image TransferTransfer, Control, and HTTPTransfer StatusDuring playback, the status of images selected for upload is shown as follows:a: “Send”Image

39Image TransferTransfer, Control, and HTTPThe Status DisplayNetwork status can also be viewed in the top level of the network menu.Signal strength: W

40Camera ControlTransfer, Control, and HTTPCamera ControlSelect this option to control the camera from a computer running Camera Control Pro 2 (availa

41Camera ControlTransfer, Control, and HTTPD Wireless NetworksOperations may take longer on wireless networks. If the signal is disrupted while pictur

42Camera ControlTransfer, Control, and HTTPThe Status DisplayNetwork status can also be viewed in the top level of the network menu.Signal strength: W

43HTTP ServerTransfer, Control, and HTTPHTTP ServerSelect HTTP server to view the pictures on the camera memory card or take photographs from the web

44HTTP ServerTransfer, Control, and HTTP3 Enter the camera URL.Enter the camera URL (“http://” followed by the camera IP address, as shown in the netw

Copying Network Profiles to the CameraUsing the UT-1 with a Computer 194 The dialog shown below will be displayed; click Next.5 Select Wired LAN when

45HTTP ServerTransfer, Control, and HTTP4 Log in.Enter your user name and password in the web browser login dialog (the user name and password are set

46HTTP ServerTransfer, Control, and HTTP5 Choose a language.Click Language.6 Choose an operating mode.Choose Shooting/Viewer to take pictures (049, 53

47HTTP ServerTransfer, Control, and HTTPA Network StatusThe status of the link between the host and the UT-1 is shown by the status LEDs and by the di

48HTTP ServerTransfer, Control, and HTTPA HTTP Server System RequirementsWindowsOSPre-installed 64- and 32-bit versions of Windows 8.1, Windows 7 (Ser

49HTTP ServerTransfer, Control, and HTTPComputer Web BrowsersThis section describes the http server displays for computer web browsers (note that the

50HTTP ServerTransfer, Control, and HTTPDisplay panelContains the exposure indicator and shows the battery level and number of exposures remaining.Cam

51HTTP ServerTransfer, Control, and HTTPThe Viewer WindowThe viewer window can be accessed by selecting Viewer on the server home page or clicking the

52HTTP ServerTransfer, Control, and HTTP❏ Film-Strip ViewChoose the picture displayed from the thumbnails at the bottom of the window.❏ Full-Frame Vie

53HTTP ServerTransfer, Control, and HTTPiPhone Web BrowsersThis section describes the http server displays for iPhone web browsers (note that the disp

54HTTP ServerTransfer, Control, and HTTPThe Viewer WindowThe viewer window can be accessed by selecting Viewer on the server home page or tapping the

Copying Network Profiles to the CameraUsing the UT-1 with a Computer206 Select Add/Edit profiles and click Next.

55HTTP ServerTransfer, Control, and HTTP❏ Full-Frame ViewView pictures full frame.Current picture (tap to return to thumbnail view)Show next imageShow

56HTTP ServerTransfer, Control, and HTTP

FTP 57FTPEthernet ConnectionsFollow the steps below to connect to an ftp server via an Ethernet network. For information on wireless connections, see

58Ethernet ConnectionsFTPStep 1: Connecting the HardwareAfter starting the ftp server, connect the camera as described below.1 Insert a memory card.Tu

59Ethernet ConnectionsFTP4 Turn the camera on.Rotate the power switch to turn the camera on.5 Press the power switch for about a second to turn the UT

60Ethernet ConnectionsFTPStep 2: Configuring the Hardware for Ethernet ConnectionsConfigure the UT-1 for use with Ethernet networks.1 Display the hard

61Ethernet ConnectionsFTP3 Start the connection wizard.Highlight Connection wizard and press 2 to start the connection wizard.4 Choose a connection ty

62Ethernet ConnectionsFTP7 Choose the server type.Highlight FTP or SFTP (secure ftp) and press 2.8 Enter the IP address.Enter the server URL or IP add

63Ethernet ConnectionsFTP11Exit the wizard.Highlight one of the following options and press J.• Connect and exit wizard: Save the new network profile

64Wireless ConnectionsFTPWireless ConnectionsFollow the steps below to connect to a wireless network.A Infrastructure and Ad Hoc ModesWireless network

iiWhat the UT-1 Can Do for YouWhat the UT-1 Can Do for YouThis manual describes how to connect to a network and upload pictures to a computer or ftp s

Copying Network Profiles to the CameraUsing the UT-1 with a Computer 21A The “Select Action” DialogThe other options in the “Select Action” dialog are

65Wireless ConnectionsFTPStep 1: Connecting the EquipmentAfter starting the computer and logging in, ready the camera and WT-5 as described below.1 In

66Wireless ConnectionsFTPStep 2: Enabling a Wireless ConnectionConfigure the UT-1 for use with wireless networks.1 Display the hardware list.In the se

67Wireless ConnectionsFTP3 Start the connection wizard.Highlight Connection wizard and press 2 to start the connection wizard.4 Choose FTP upload (07)

68Wireless ConnectionsFTP❚❚ Search for Wireless NetworkSelect Search for wireless network in Step 6 on page 67 to choose from a list of the networks

69Wireless ConnectionsFTP3 Choose your next step.The message at right is displayed when a connection is established. Proceed to page 72.❚❚ Push-Button

70Wireless ConnectionsFTP❚❚ PIN-Entry WPSChoose PIN-entry WPS in Step 6 on page 67 if the wireless LAN access point uses PIN-entry WPS.1 Enter the PIN

71Wireless ConnectionsFTP❚❚ Direct Connection (Ad Hoc)To connect directly to an ftp server or computer in ad hoc mode, select Direct connection (ad ho

72Wireless ConnectionsFTPStep 4: Network SettingsFollow the steps below to connect to the ftp server.1 Obtain or select an IP address.Highlight one of

73Wireless ConnectionsFTP4 Log in.Highlight one of the following options and press J.• Anonymous login: Select this option if the server does not requ

74Wireless ConnectionsFTP5 Choose a destination folder.Highlight one of the following options and press J.• Home folder: Select this option to upload

Copying Network Profiles to the CameraUsing the UT-1 with a Computer227 Select Add new profile and click Next.

75FTP UploadFTPFTP UploadPhotos and movies can be uploaded from camera memory cards to an ftp server as described below, or photos can be uploaded as

76FTP UploadFTP3 Upload pictures.Press J. A white transfer icon will appear on the picture and upload will begin immediately. The transfer icon turns

77FTP UploadFTPUploading New Photographs as They Are TakenTo upload new photographs as they are taken, select On for Network > Options > Auto se

78FTP UploadFTPTransfer StatusDuring playback, the status of images selected for upload is shown as follows:a: “Send”Images that have been selected fo

79FTP UploadFTPThe Status DisplayNetwork status can also be viewed in the top level of the network menu.Signal strength: Wireless signal strength. Eth

80FTP UploadFTP

Menu Guide 81Menu GuideThis section describes the settings available for the Network option in the camera setup menu when the UT-1 is connected.Choose

82Network SettingsMenu GuideNetwork SettingsHighlight Network settings and press 2 to display the network profiles list, where you can create new prof

83Network SettingsMenu GuideCopy to/from CardThis option is available only with ftp and http server connections. Select Copy profile from card to copy

84Network SettingsMenu GuideEditing Network ProfilesTo edit network profiles, highlight the profile in the profile list, press W, and choose from the

Copying Network Profiles to the CameraUsing the UT-1 with a Computer 238 Enter the following information and click Next:• Profile name: Enter a name o

85Network SettingsMenu Guide❏ WirelessEdit the following wireless settings:• SSID (required): Enter the name (SSID) of the network on which the host c

86Network SettingsMenu Guide❏ TCP/IPIf the network is configured to supply IP addresses automatically, select Enable for Obtain automatically. Otherwi

87OptionsMenu GuideOptionsEdit the following settings.Auto SendIf On is selected for image transfer or ftp server connections, photos will automatical

88OptionsMenu GuideOverwrite If Same NameChoose Ye s to overwrite files with duplicate names during upload to an ftp server, No to add numbers to the

89OptionsMenu GuideHTTP User SettingsEnter a user name and password for connection to an http server (http server connections only).Battery InfoDispla

90OptionsMenu GuideMAC AddressDisplay the MAC address of the hardware selected for Choose hardware (0 81).Firmware VersionView the current UT-1 firmwa

Appendices 91AppendicesCopying ProfilesCamera network profiles can be copied to a computer, which will then automatically be configured for wireless c

92Copying ProfilesAppendices4 Choose an adapter.Choose an adapter from the pull-down menu and click Next. If Image transfer or Camera control is selec

93Creating Profiles on a ComputerAppendicesCreating Profiles on a ComputerThe Wireless Transmitter Utility (011) can be used to create network profile

94Creating an FTP ServerAppendicesCreating an FTP ServerImages can be uploaded to ftp servers created using the standard ftp services included with Wi

Copying Network Profiles to the CameraUsing the UT-1 with a Computer249 Select Manual setup (for advanced users) and click Next.

95Creating an FTP ServerAppendices1 Go to Network and Sharing Center.Click Control Panel > Network and Internet > Network and Sharing Center.2 D

96Creating an FTP ServerAppendices4 Display TCP/IP settings.Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

97Creating an FTP ServerAppendices5 Enter an IP address and subnet mask.Enter an IP address and subnet mask for the ftp server and click OK.

98Creating an FTP ServerAppendices6 Close the network properties dialog.Click Close.7 Open Administrative Tools.Click Control Panel > System and Se

99Creating an FTP ServerAppendices8 Open the IIS manager.Double-click Internet Information Services (IIS) Manager.9 Select Add FTP Site…Right-click th

100Creating an FTP ServerAppendices10Enter site information.Name the site and choose the path to the folder that will be used for ftp upload. Click Ne

101Creating an FTP ServerAppendices11Choose binding and SSL options.Select the IP address entered in Step 5, note the port number, select Start FTP si

102Creating an FTP ServerAppendices12Choose authentication options.Adjust settings as described below and click Finish.• Authentication: Basic• Allow

103Manual Profile CreationAppendicesManual Profile CreationFollow the steps below to manually configure the camera for connection to ftp and http serv

104Manual Profile CreationAppendices4 Select a connection type.Highlight FTP upload or HTTP server and press 2.5 Adjust settings.Adjust settings as de

Copying Network Profiles to the CameraUsing the UT-1 with a Computer 25A “Automatic Setup”Choose Automatic setup (recommended) when accessing a networ

105TroubleshootingAppendicesTroubleshootingProblem Solution Page“POWER” LED does not light.• Turn the UT-1 on.• Confirm that the battery is inserted a

106SpecificationsAppendicesSpecifications❚❚ Communication Unit UT-1EthernetStandards IEEE 802.3u (100BASE-TX)/IEEE 802.3 (10BASE-T)Data rates*10/100 M

107SpecificationsAppendices* Maximum logical data rates according to IEEE standard. Actual rates may differ.† With large antenna at wireless LAN acce

108SpecificationsAppendicesA Battery LifeThe length of time batteries can be used and the number of shots that can be uploaded before recharging varie

109IndexAppendicesIndexSymbolsa: “Send” ...38, 78b: “Sending”...38, 78

110IndexAppendicesSSearch for wireless network .. 27, 28, 67, 68Send file as... 87Send folder ...

No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without writ

Copying Network Profiles to the CameraUsing the UT-1 with a Computer2610Enter the following information and click Next.• Network name (SSID): Enter a

Copying Network Profiles to the CameraUsing the UT-1 with a Computer 27

Copying Network Profiles to the CameraUsing the UT-1 with a Computer2811If the network is configured to supply IP addresses automati-cally using a DHC

Copying Network Profiles to the CameraUsing the UT-1 with a Computer 2912Confirm that settings are correct and click Next.13Select Finish wizard and c

Copying Network Profiles to the CameraUsing the UT-1 with a Computer3014Turn the camera off and disconnect the USB cable.The network profile has now b

iiiWhat the UT-1 Can Do for YouNetwork ConnectionsOnce a network connection has been established, you can:Upload existing pictures to a computer (034)

31Uploading Pictures to a Host Computer / Connecting the UT-1Using the UT-1 with a ComputerUploading Pictures to a Host ComputerConnecting the UT-1Bef

32Uploading Pictures to a Host Computer / Connecting the UT-1Using the UT-1 with a Computer3 Connect the Ethernet cable or wireless transmitter.Ethern

33Uploading Pictures to a Host Computer / Connecting the UT-1Using the UT-1 with a Computer6 Display network profiles.In the setup menu, select Networ

34Uploading Pictures to a Host Computer / Uploading ImagesUsing the UT-1 with a ComputerUploading Images1 Press the K button to view pictures on the m

35Uploading Pictures to a Host Computer / Uploading ImagesUsing the UT-1 with a Computer3 Press the power switch for about a second to turn the UT-1 o

36Uploading Pictures to a Host Computer / Uploading ImagesUsing the UT-1 with a Computer❏ Transfer StatusDuring playback, the status of images selecte

37Uploading Pictures to a Host Computer / Uploading ImagesUsing the UT-1 with a Computer❏ Network StatusThe status of the link between the host and th

38Uploading Pictures to a Host Computer / Uploading ImagesUsing the UT-1 with a ComputerThe Status DisplayNetwork status can also be viewed in the top

39Camera Control / Connecting to the ComputerUsing the UT-1 with a ComputerCamera ControlIn camera control mode, a camera equipped with a UT-1 can be

40Camera Control / Connecting to the ComputerUsing the UT-1 with a Computer3 Turn the camera on.4 Select the network type.In the camera setup menu, op

ivWhat the UT-1 Can Do for YouTrademark InformationMac OS is a trademark of Apple Computer, Inc. Microsoft, Windows, and Windows Vista are registered

41Camera Control / Controlling the CameraUsing the UT-1 with a ComputerControlling the Camera1 Complete the steps in “Connecting to the Computer” (039

42Camera Control / Controlling the CameraUsing the UT-1 with a Computer❏ Network StatusThe status of the link between the host and the UT-1 is shown b

43Camera Control / Controlling the CameraUsing the UT-1 with a ComputerThe Status DisplayNetwork status can also be viewed in the top level of the net

44Camera Control / Controlling the CameraUsing the UT-1 with a Computer

Uploading Pictures to an ftp Server 45Uploading Pictures to an ftp Server Follow the steps below to upload pictures to an ftp server over wireless or

46Copying Network Profiles to the CameraUploading Pictures to an ftp ServerCopying Network Profiles to the CameraBefore copying network profiles, conf

47Copying Network Profiles to the CameraUploading Pictures to an ftp Server4 The dialog shown below will be displayed; click Next.5 Select Wired LAN w

48Copying Network Profiles to the CameraUploading Pictures to an ftp Server6 Select Add/Edit profiles and click Next.7 Select Add new profile and clic

49Copying Network Profiles to the CameraUploading Pictures to an ftp Server8 Enter the following information and click Next:• Profile name: Enter a na

50Copying Network Profiles to the CameraUploading Pictures to an ftp Server9 Select Manual setup (for advanced users) and click Next.

vFor Your SafetyFor Your SafetyTo prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in th

51Copying Network Profiles to the CameraUploading Pictures to an ftp ServerA “Automatic Setup”Choose Automatic setup (recommended) when accessing a ne

52Copying Network Profiles to the CameraUploading Pictures to an ftp Server10Enter the following information and click Next.• Network name (SSID): Ent

53Copying Network Profiles to the CameraUploading Pictures to an ftp Server

54Copying Network Profiles to the CameraUploading Pictures to an ftp Server11Remove the check from Obtain IP address automatically and enter the follo

55Copying Network Profiles to the CameraUploading Pictures to an ftp Server12Enter ftp settings and click Next.• FTP server: Enter the URL or IP addre

56Copying Network Profiles to the CameraUploading Pictures to an ftp Server13Confirm that settings are correct and click Next.14Select Finish wizard a

57Copying Network Profiles to the CameraUploading Pictures to an ftp Server15Turn the camera off and disconnect the USB cable.The network profile has

58Connecting to the ftp ServerUploading Pictures to an ftp ServerConnecting to the ftp ServerBefore connecting the UT-1, confirm that the host compute

59Connecting to the ftp ServerUploading Pictures to an ftp Server3 Connect the Ethernet cable or wireless transmitter.Ethernet networks: To access the

60Connecting to the ftp ServerUploading Pictures to an ftp Server6 Display network profiles.In the setup menu, select Network > Network settings to

viFor Your SafetyAvoid extended contactDo not remain in contact with the camera, communication unit, battery, or charger for extended periods while th

61Uploading ImagesUploading Pictures to an ftp ServerUploading Images1 Press the K button to view pictures on the memory card. Display the first pictu

62Uploading ImagesUploading Pictures to an ftp Server3 Press the power switch for about a second to turn the UT-1 off, then disconnect the USB cable a

63Uploading ImagesUploading Pictures to an ftp Server❏ Transfer StatusDuring playback, the status of images selected for uploaded is shown as follows:

64Uploading ImagesUploading Pictures to an ftp Server❏ Network StatusThe status of the link between the host and the UT-1 is shown by the status LEDs

65Uploading ImagesUploading Pictures to an ftp ServerThe Status DisplayNetwork status can also be viewed in the top level of the network menu.Signal s

66Uploading ImagesUploading Pictures to an ftp Server

Menu Guide 67Menu GuideThis section describes the settings available for the Network option in the camera setup menu when the UT-1 is connected.Menu i

68Choose HardwareMenu GuideChoose HardwareChoose the hardware used to connect to the network: Ethernet (Wired LAN) or wireless LAN (Wireless LAN).Netw

Network Settings / Deleting Network ProfilesMenu Guide 69Deleting Network ProfilesPress O (Q) to delete the profile currently highlighted in the profi

Network Settings / Editing ftp Server Profiles / GeneralMenu Guide70A Text EntryThe following dialog is displayed when text entry is required.Use the

viiNoticesNotices• No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or tra

Network Settings / Editing ftp Server Profiles / WirelessMenu Guide 71❏ WirelessEdit the following wireless settings:• SSID (required): Enter the name

Network Settings / Editing ftp Server Profiles / TCP/IPMenu Guide72❏ TCP/IPIf the network is configured to supply IP addresses automatically, select E

Options / Auto SendMenu Guide 73OptionsEdit the following settings.Auto SendIf On is selected for image transfer or ftp server connections, photos wil

Options / Overwrite If Same NameMenu Guide74Overwrite If Same NameChoose Ye s to overwrite files with duplicate names during upload to an ftp server,

Options / Battery InfoMenu Guide 75Battery InfoDisplay information for the battery inserted in the UT-1. The five-level Battery age display shows the

76OptionsMenu Guide

Appendices 77AppendicesCreating an FTP ServerImages can be uploaded to ftp servers created using the standard ftp services included with Windows 8, Wi

78Creating an FTP ServerAppendicesWindows 8/Windows 71 Go to Network and Sharing Center.Click Control Panel > Network and Internet > Network and

79Creating an FTP ServerAppendices4 Display TCP/IP settings.Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.5 Enter an IP address a

80Creating an FTP ServerAppendices6 Close the network properties dialog.Click Close.7 Open Administrative Tools.Click Control Panel > System and Se

viiiNoticesNotice for Customers in the U.S.A.❏ U.S.A. Federal Communications Commission (FCC) Declaration of ConformityFCC Radio Frequency Interferen

81Creating an FTP ServerAppendices8 Open the IIS manager.Double-click Internet Information Services (IIS) Manager.9 Select Add FTP Site….Right-click t

82Creating an FTP ServerAppendices10Enter site information.Name the site and choose the path to the folder that will be used for ftp upload. Click Nex

83Creating an FTP ServerAppendices11Choose binding and SSL options.Select the IP address entered in Step 5, note the port number, select Start FTP sit

84Creating an FTP ServerAppendices12Choose authentication options.Adjust settings as described below and click Finish.• Authentication: Basic• Allow a

85Creating an FTP ServerAppendicesWindows Vista1 Display network connections.Click Start > Control Panel > Network and Internet Settings > Ne

86Creating an FTP ServerAppendices4 Display TCP/IP settings.Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

87Creating an FTP ServerAppendices5 Enter an IP address and subnet mask.Enter an IP address and subnet mask for the ftp server and click OK.6 Open Adm

88Creating an FTP ServerAppendices7 Open the IIS manager.Double-click Internet Information Services (IIS) 6.0 Manager.8 Click Allow.A “User Account Co

89Creating an FTP ServerAppendices9 Display ftp site properties.Right-click Default FTP Site and select Properties.

90Creating an FTP ServerAppendices10Select the address and port number.Select the IP address entered in Step 5 and enter a TCP port number.