Nikon S1200PJ Uživatelský manuál stáhnout pdf (Strana 192)

E74

The Setup Menu

Reference Section

B Notes on Charging with Connection to a Computer

• The battery cannot be charged, nor can data be transferred, when the camera is connected to a

computer before the camera’ s display language and date and time have been set (A 24). If the

camera’s clock battery (A 25) has been exhausted, the date and time must be reset before the

battery can be charged or pictures can be transferred with connection to a computer. In this case,

use the Charging AC Adapter EH-69P (A 18) to charge the battery and then set the camera’s date

and time.

• If the camera is turned off, charging will also stop.

• If a computer enters sleep mode while charging, charging will stop and the camera may be turned

off.

• When disconnecting the camera from a computer, turn the camera off and then disconnect the

USB cable.

• It takes about 5 hours to charge a fully exhausted battery. Charging time increases when pictures

are transferred while the battery is charging.

• When the camera is connected to a computer, an application installed on the computer, such as

Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of

charging the battery, exit the application.

• The camera turns off automatically if there is no communication with the computer for 30 minutes

after the battery has finished charging.

• Depending upon computer specifications, settings, and power supply and allocation, it may be

impossible to charge the battery inserted into the camera via computer connection.

C Charge Lamp

The following chart explains charge lamp status when the camera is connected to a computer.

Charge lamp Description

Blinks slowly (green) Battery charging.

Off

Battery not charging.

When the charge lamp changes from slow blinking (green) to off while

the power-on lamp is lit, charging is complete.

Flickers (green)

• The ambient temperature is not suited to charging. Charge the battery

indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F).

• A USB cable is not correctly connected or the battery is faulty.

Reconnect the USB cable correctly or replace the battery.

• Computer is in sleep mode and does not supply power. Reboot the

computer.

• The battery cannot be charged because the computer’ s specifications

or settings do not support power supply to the camera.

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 227 228

Žádné komentáře

Nikon S1200PJ Uživatelský manuál Strana 192