Nikon S1200PJ Uživatelský manuál stáhnout pdf (Strana 212)

Troubleshooting

Technical Notes and Index

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the

camera may stop functioning. In most cases, this phenomenon is caused by a

strong external static charge. Turn the camera off, remove and replace the battery,

then turn the camera on again. In the event of continued malfunction, contact

your retailer or Nikon-authorized service representative. Note that disconnecting

the power source as described above may result in the loss of any data not

recorded to internal memory or the memory card at the time the problem

occurred. Data already recorded will not be affected.

Monitor turns off, and the

power-on lamp blinks

rapidly.

Battery temperature is high. Turn off camera

and allow battery to cool down before

resuming use. After the lamp blinks for three

minutes, the camera will turn off automatically.

Pressing the power switch also turns off the

camera.

Camera becomes hot.

The camera may become hot when shooting

movies for an extended period of time or when

the camera is used in a hot area; this is not a

malfunction.

–

Camera does not respond

to remote control

(available separately)

operation.

• Battery of the remote control is exhausted.

• Point the remote control at the infrared

receiver on the front or rear of the camera at

the distance within approximately 5 m

(16 ft.).

• The remote control cannot be used when

Smile timer is set to On in smart portrait

mode and the camera detects human faces.

• The shutter may not be released when

attempting to use the remote control to take

pictures of scenes exhibiting severe

backlighting.

36, 81

–

Problem Cause/Solution A

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 227 228

Komentáře k této Příručce

Žádné komentáře

Nikon S1200PJ Uživatelský manuál Strana 212

Komentáře k této Příručce

Související produkty a manuály pro Videokamery Nikon S1200PJ